| Customization: | Available |
|---|---|
| Phase: | Single/Three Phases |
| Type: | On-line |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Eaton 93PR UPS 25-200 kW | ||
| Technical specifications | ||
| General | ||
| UPS output power rating(1.0 p.f.) | 25,50,75,100,125,150,175,200kW | |
| Efficiency in double conversion mode | >96% | |
| Efficiency in Energy Saver System (ESS) | >99% | |
| Static bypass rating | 200kW | |
| External paralleling | up to 4 units with HotSync technology | |
| UPS topology | Double conversion | |
| UPS degree of protection | IP20 | |
| Acoustic noise at 1 m,in 25ºC ambient temperature | <70 dBA in double conversion,<55 dBA in ESS | |
| Altitude (max) | 1000m above sea level at 40ºC.Maximum 2000m with 1%derating per each add.100 m | |
| Input | ||
| Rated input voltage | 220/380 V,230/400 V,240/415V50/60 Hz | |
| Voltage tolerance -Rectifier input | 187 to 276 V | |
| Voltage tolerance -Bypass input | rated voltage -15%/+10% | |
| Rated input frequency | 50 or 60 Hz,user configurable | |
| Frequency tolerance | 40 to 72 Hz | |
| Input wiring | 3 phase+neutral | |
| Input power factor at 100%load | >0.99 | |
| Input ITHD | <3% | |
| Rated input r.m.s current | 25kW 50kW 75kW 100kW 125kW 150kW 175kW 200kW | |
| 380V | 40 A 80 A 120 A 159 A 199 A 239 A 278 A 318 A | |
| 400V | 38 A 76 A 114 A 151 A 189 A 227 A 264 A 302 A | |
| 415V | 37 A 73 A 110 A 146 A 182 A 219 A 255 A 291 A | |
| Soft start capability | Yes | |
| Internal backfeed protection | Yes | |
| Output | ||
| Output wiring | 3 phase+neutral | |
| Rated output voltage rating | 220/380 V,230/400 V,240/415 V,configurable | |
| Total voltage harmonic distortion | <1%(100%linear load);<3%(100%non-linear load) | |
| Output power factor | 1.0 | |
| Permitted load power factor | 0.8 lagging to 0.8 leading | |
| Overload on inverter | 10 min 102-110%,60 sec 111-125%,10 sec 126-150%,300 ms>150%. | |
| Overload on bypass | Continuous<125%,20 ms 1000% | |
| Battery | ||
| Battery type | 12V,VRLA | |
| Charging method | ABM technology or Float | |
| Temperature compensation | Optional | |
| Battery nominal voltage(VRLA) | 480 V | |
| Battery quantity | 36 to 44 blocks.Default is 40 blocks | |
| Charge current limit | Default 5A,configurable maximum 25A per UPM | |
| Battery start capability | Yes | |
| Communications | ||
| Minislot | 3 communication bays | |
| Network/SNMP interface | Yes,optional | |
| Serial ports | Built-in host and device USB | |
| Standard connectivity ports | Mini-slot ports for optional cards,Device USB and Host USB,RS-232 service port,relay output, 5 building alarm inputs and a dedicated EPO |
|
| Accessories | ||
| MiniSlot connectivity (Web/SNMP,ModBus/Jbus,Relay) | ||
| External Battery Cabinet(EBC) | ||
| Parallel Tie Cabinet(PTC) | ||
| External Maintenance Bypass Switches(EMBS) | ||
| External Battery Cabinet Breaker(EBCB) | ||
| Compliance with standards | ||
| Safety | IEC 62040-1 | |
| EMC | IEC 62040-2 | |
| Performance | IEC 62040-3 | |
| Due to continuous product improvement programmes,specifications are subject to change without notice. | ||
1. May I take some samples to test before I placing the order?
){kind=link}